HoRNDIS is required for Remote Network Driver Interface Specification (RNDIS) which is a USB protocol to provides a virtual Ethernet link. If you don't want to access your device over network – don't install HoRNDIS. It is optional.
Make sure the following drivers are installed:
- HoRNDIS, HoRNDIS (pronounce: 'horrendous') is a driver for Mac OS X that allows you to use your RNDIS to get network access to Pluto. It is known to work with Mac OS X versions 10.6.8 (Snow Leopard) through 10.12 (Yosemite). Although you should be careful with all drivers that you install on your computer, HoRNDIS has been tested at least well enough for the author (and many others) to run full time on their own personal computers. It would be great if Apple decided to support this natively – since RNDIS is a Microsoft specification, it's unlikely.
The drivers and files should be compatible with: https://soft-my.mystrikingly.com/blog/moonlight-valley-demo-mac-os.
- macOS El Capitan 10.11
- macOS Yosemite 10.10
Amazon Music Stream millions of songs: Amazon Advertising Find, attract, and engage customers: Amazon Drive Cloud storage from Amazon: 6pm Score deals on fashion brands.
- Hello World in Java on Mac OS X: This tutorial is an introduction to object oriented programming in the high-level computer programming language, Java, on a Mac OS X operating system. The following instructions will guide you through writing, compiling, and executing a simple compu.
- Pluto, LG HI-MACS. Available from: $76.35. HI-MACS® is extremely hardwearing and durable and transforms the kitchen or bathroom throughout the day into universal function spaces. Comfortable, easy to care for handle and clean. This stunning and highly functional installation of HI-MACS® combine both elements into desirable living spaces.
A reboot is required after installing the HoRNDIS.
Serial
[screen is terminating]adi-mm:tests analogdevices$
Mass Storage
Ethernet
Ethernet Warning
Like most of the network settings on Pluto or the M2k – things are meant to be easy to use. This also means things are inherently insecure.
For example – the root password of Pluto is analog. We post it on the Internet. Think about that for a moment. Long live the rat queen mac os. This could allow anyone with an IP connection to take over the device and use it for malicious purposes.
Never set up a bridge between the Internet and a network connected Pluto with the default images.
Hello From Pluto Mac Os Update
Unfortunately – nothing on your host understands the what the IP address of the usb device is. You, the human behind the keyboard need to understand this before any sort of networking will work. There are two main ways to do this:
Once the HoRNDIS driver is installed, you should see something like this when you goto → System Preferences → Network.
You may need to reboot without the PlutoSDR plugged in, and then attach the PlutoSDR to get HoRNDIS to load properly
To check things out, it should look something like this in dmesg:
ssh config
Adding a quick/short ssh config file, which describes the USB device can be helpful. It's maintained in github, and it's a simple matter of grabbing the raw text file. You shouldn't do the exact below unless you have no ~/.ssh/config file. Otherwise, click on this link and copy/paste it into the system wide /etc/ssh/ssh_config file, or the user specific ~/.ssh/config file.
Since the ssh key on the pluto changes every boot, we want to be able to never store the key (so we store it to /dev/null. This does make it easier to use (don't need to continually edit the known_hosts file), but does make things susceptible to man in the middle attacks.
if you have sshpass installed, you can use that so you dont need to type in a password:
There are many reasons why you might want to factory reset your Mac computer. Perhaps you want to sell, trade, recycle, or give it away, and you don't want your personal information getting into the wrong hands. Or maybe your Mac has been acting sluggish lately and you want to get it working like new. Here's how to reset your Mac computer to factory conditions in two ways, and what you should do before resting your Mac.
Hello From Pluto Mac Os 7
What to Do Before You Reset Your Mac
Before resetting your Mac, you should back up all your important files. Then you should deauthorize iTunes or Music, and log out of iCloud, Messages, and FaceTime. It is also recommended that you reset your P-RAM (or NVRAM) and unpair your Bluetooth devices as well.
- When you reset a Mac to factory settings, it will erase all your files, apps, settings, profiles, and other information. So, it is important that you back up any important data on an external hard drive first. Check out our step-by-step guide on how to back up your Mac with Time Machine to find out more.
- To deauthorize iTunes or Music, open your iTunes or Music app. From the menu bar at the top of your screen, click Account > Authorizations > Deauthorize This Computer. Then enter your Apple ID and select Deauthorize.
- To sign out of iCloud, click the Apple logo in the top-left corner of your screen and select System Preferences. Then click Apple ID (if you don't see this, click the red circle in the top-left corner of the window and re-open the app). Finally, select Overview in the left sidebarand select Sign Out.
- To sign out of Messages, open the app and click Messages in the menu bar at the top of your screen. Then select Preferences and click the iMessage tab at the top of the window. Next, select the account you want to sign out of and click Sign Out. Finally, select Sign Out again in the dialog box that appears. The process is similar for logging out of Facetime.
- To unpair Bluetooth devices, go to System Preferences > Bluetooth. Then right-click or Control-click the device you want to unpair and select Remove from the pop-up menu that appears.
- Resetting the Parameter Random Access Memory (P-RAM), or the Non-Volatile Random Access Memory (NVRAM) for newer Macs, erases user settings and restores security defaults. To reset your PRAM/NVRAM, shut down your computer. As you turn it on, hold down the Command + Option + P + R keys on your keyboard at the same time. Release after about 20 seconds. If your Mac has a startup sounds, release the keys once you hear this sound. If you have a Mac with the Apple T2 security chip, release the keys after the Apple logo appears and disappears twice.
- HoRNDIS, HoRNDIS (pronounce: 'horrendous') is a driver for Mac OS X that allows you to use your RNDIS to get network access to Pluto. It is known to work with Mac OS X versions 10.6.8 (Snow Leopard) through 10.12 (Yosemite). Although you should be careful with all drivers that you install on your computer, HoRNDIS has been tested at least well enough for the author (and many others) to run full time on their own personal computers. It would be great if Apple decided to support this natively – since RNDIS is a Microsoft specification, it's unlikely.
The drivers and files should be compatible with: https://soft-my.mystrikingly.com/blog/moonlight-valley-demo-mac-os.
- macOS El Capitan 10.11
- macOS Yosemite 10.10
Amazon Music Stream millions of songs: Amazon Advertising Find, attract, and engage customers: Amazon Drive Cloud storage from Amazon: 6pm Score deals on fashion brands.
- Hello World in Java on Mac OS X: This tutorial is an introduction to object oriented programming in the high-level computer programming language, Java, on a Mac OS X operating system. The following instructions will guide you through writing, compiling, and executing a simple compu.
- Pluto, LG HI-MACS. Available from: $76.35. HI-MACS® is extremely hardwearing and durable and transforms the kitchen or bathroom throughout the day into universal function spaces. Comfortable, easy to care for handle and clean. This stunning and highly functional installation of HI-MACS® combine both elements into desirable living spaces.
A reboot is required after installing the HoRNDIS.
Serial
[screen is terminating]adi-mm:tests analogdevices$
Mass Storage
Ethernet
Ethernet Warning
Like most of the network settings on Pluto or the M2k – things are meant to be easy to use. This also means things are inherently insecure.
For example – the root password of Pluto is analog. We post it on the Internet. Think about that for a moment. Long live the rat queen mac os. This could allow anyone with an IP connection to take over the device and use it for malicious purposes.
Never set up a bridge between the Internet and a network connected Pluto with the default images.
Hello From Pluto Mac Os Update
Unfortunately – nothing on your host understands the what the IP address of the usb device is. You, the human behind the keyboard need to understand this before any sort of networking will work. There are two main ways to do this:
Once the HoRNDIS driver is installed, you should see something like this when you goto → System Preferences → Network.
You may need to reboot without the PlutoSDR plugged in, and then attach the PlutoSDR to get HoRNDIS to load properly
To check things out, it should look something like this in dmesg:
ssh config
Adding a quick/short ssh config file, which describes the USB device can be helpful. It's maintained in github, and it's a simple matter of grabbing the raw text file. You shouldn't do the exact below unless you have no ~/.ssh/config file. Otherwise, click on this link and copy/paste it into the system wide /etc/ssh/ssh_config file, or the user specific ~/.ssh/config file.
Since the ssh key on the pluto changes every boot, we want to be able to never store the key (so we store it to /dev/null. This does make it easier to use (don't need to continually edit the known_hosts file), but does make things susceptible to man in the middle attacks.
if you have sshpass installed, you can use that so you dont need to type in a password:
There are many reasons why you might want to factory reset your Mac computer. Perhaps you want to sell, trade, recycle, or give it away, and you don't want your personal information getting into the wrong hands. Or maybe your Mac has been acting sluggish lately and you want to get it working like new. Here's how to reset your Mac computer to factory conditions in two ways, and what you should do before resting your Mac.
Hello From Pluto Mac Os 7
What to Do Before You Reset Your Mac
Before resetting your Mac, you should back up all your important files. Then you should deauthorize iTunes or Music, and log out of iCloud, Messages, and FaceTime. It is also recommended that you reset your P-RAM (or NVRAM) and unpair your Bluetooth devices as well.
- When you reset a Mac to factory settings, it will erase all your files, apps, settings, profiles, and other information. So, it is important that you back up any important data on an external hard drive first. Check out our step-by-step guide on how to back up your Mac with Time Machine to find out more.
- To deauthorize iTunes or Music, open your iTunes or Music app. From the menu bar at the top of your screen, click Account > Authorizations > Deauthorize This Computer. Then enter your Apple ID and select Deauthorize.
- To sign out of iCloud, click the Apple logo in the top-left corner of your screen and select System Preferences. Then click Apple ID (if you don't see this, click the red circle in the top-left corner of the window and re-open the app). Finally, select Overview in the left sidebarand select Sign Out.
- To sign out of Messages, open the app and click Messages in the menu bar at the top of your screen. Then select Preferences and click the iMessage tab at the top of the window. Next, select the account you want to sign out of and click Sign Out. Finally, select Sign Out again in the dialog box that appears. The process is similar for logging out of Facetime.
- To unpair Bluetooth devices, go to System Preferences > Bluetooth. Then right-click or Control-click the device you want to unpair and select Remove from the pop-up menu that appears.
- Resetting the Parameter Random Access Memory (P-RAM), or the Non-Volatile Random Access Memory (NVRAM) for newer Macs, erases user settings and restores security defaults. To reset your PRAM/NVRAM, shut down your computer. As you turn it on, hold down the Command + Option + P + R keys on your keyboard at the same time. Release after about 20 seconds. If your Mac has a startup sounds, release the keys once you hear this sound. If you have a Mac with the Apple T2 security chip, release the keys after the Apple logo appears and disappears twice.
How to Factory Reset a Mac Using Recovery Mode
To reset your Mac, first restart your computer. Then press and hold Command + R until you see the Apple logo. Next, go to Disk Utility >View > View all devices, and choose the top drive. Next, click Erase, fill out the required details, and hit Erase again. Finally, exit Disk Utility, then reinstall your macOS.
- Restart your Mac. You can do this by clicking the Apple icon in the top-left corner of your screen and selecting Restart.If you are resetting a MacBook, make sure it is connected to a reliable power source. You should also unplug all your devices except your mouse and keyboard to avoid accidentally erasing an external hard drive.
Note: If your computer is frozen, press Control + Command + Eject (or the power button) to force restart your computer.
- Then press and hold the Command + R keys until you see the Apple logo appear. You can release the keys when you see the Apple logo on your screen. When the progress bar under the Apple logo is completed, you will enter Recovery Mode. From here, you will erase your hard drive and reinstall the macOS that was installed on your computer when you got it.
- Next, select Disk Utility.
- Then select Continue.
- In the Disk Utility window, click View.
- Then select Show All Devices. You will see the View button in the top-left corner of the window. Once you click it, a drop-down menu will appear.
- Select the drive you want to erase. In most cases, you want to delete the whole disk, which is the highest option on the Internal list. This will ensure that you delete all your old data so you can install the Mac operating system (macOS) on a clean drive.
- Then click Erase. This is the button located at the top of the Disk Utility window.
Note: Your Mac has a copy of the macOS that came with it stored on a partition of your main hard drive. So, even if you erase your hard drive, you will be able to reinstall macOS later.
- Next, enter a name for your Mac and select your format and scheme.
Name: You can choose any name you want, but it is recommended that you don't use any personal information because there's a chance that other people will be able to see your drive's name when you are connected to the same network.
Format: You can choose either APFS (Apple File System) or macOS Extended (Journaled). The Disk Utility will show the compatible format by default. However, if you want to double-check the current format of the volume, click on the lowest option on the Internal tree (usually called Mac HD). On the right, you should see 'Type.' If the built-in disk came APFS-formatted, you should not reformat it as Journaled. Most older computers will be Journaled, while most modern laptops that come with solid-state drives (SSDs) are APFS-formatted. Casino style slots free games.
Scheme: If prompted, choose GUID Partition Map.
Note: This is the last step before all your data will be deleted. If you need to back up any data, click the Apple logo in the top-right corner of your screen and select Restart to return to your desktop.
- Then click Erase. You will see this in the bottom-right corner of the pop-up window. If you see Erase Volume Group, click that instead. Take note that this is different from the Delete Volume Group option, which you should not click.
- Wait for the disk to be erased and click Done. This should only take a few minutes at most.
- Then click Disk Utility.
- Next, click Quit Disk Utility. You can also close Disk Utility by clicking the red button in the top-left corner of the window.
- Then select Reinstall macOS and click Continue.
Note: If you stop the process now, your data will be erased, but the next person to handle the computer will have a hard time starting up. So, if you want to make it easy for whoever you give or sell your Mac computer to, you should reinstall macOS on your computer.
- Next, click Continue.
- Then click Agree.
- Next, click Agree again.
- Then select your boot disk. Your boot disk is your main drive, so make sure you don't select an external hard drive.
- Next, click Continue.
- Wait for the install process to complete. This might take several minutes to complete, depending on the speed of your computer and your internet connection.
After the countdown ends, your Mac will restart, and another installation process will begin with a countdown timer. This installation will also take several minutes.
- Once the installation is complete, press the Command + Q keys on your keyboard at the same time. You will know the installation is complete when you see the screen that says, 'Select Your Country or Region.' You can turn off your Mac computer at this point, so the next user can complete the setup process on their own.
- Finally, click Shut Down.
Once you are done, you can unplug the computer or close the laptop. Now, when you give your Mac to someone else, they will be able to start the setup process and enter their own settings and information.
If you plan on selling your Mac computer, check out how much you could get from Apple's Trade In program here.
Was this article helpful?
Related Articles
